描述:LANKAI 恒溫FOC直流無刷電機控制器:①融合最新FOC正弦波矢量控制技術和模糊PI控制技術,運行平穩,緩啟緩?fù)#罅?,輕噪音,發熱低,帶過流過速堵轉保護電機,可長時間穩定運行。②采用模糊PID控溫,超調小,穩定快,精度高。恒溫自適應PID,一鍵自整定。③支持232接口和標準485ModBus-RTU協議。
品牌 | 其他品牌 | 電動機功率 | 0.06-0.24kW |
---|---|---|---|
外形尺寸 | 92mm*150mmmm | 重量 | 2.5kg |
應用領域 | 環保,生物產業,電子,電氣,綜合 | 速度范圍 | 0-1500RPM |
分辨率 | 1RPM | 電機類型 | FOC矢量正旋波直流無刷電機,伺服電機 |
電機功率 | 驅動電流2.5A/5A/10A | 供電電源 | 直流24V |
程序段 | 99段編程 | 恒溫范圍 | 0-100°C/-90℃-400℃ |
傳感器類型 | 熱敏電阻/PT100 | 控溫精度 | 0.1°C |
適用范圍 Application
LANKAI 恒溫FOC直流無刷電機控制器廣泛適用于各式振蕩器,搖床搖瓶機,電動攪拌器,磁力攪拌器,反應釜等高精度恒速設備。
Application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.
產品特點 Feature
LANKAI 恒溫FOC直流無刷電機控制器LKSC-C系列產品是高集成智能溫速一體控制模塊,其性能如下:
①采用最新FOC 正弦波矢量控制技術和模糊PI控制技術,運行平穩,緩啟緩?fù)?,大力矩,輕噪音,發熱低,可長時間穩定運行,帶過流過速堵轉保護電機等功能。標配57、86電機, 也可適配其他支持FOC的無刷電機。
②適配直流無刷電機伺服電機。恒速,恒扭矩模式、電機正反轉可切換。
③采用多年自研模糊PID控溫,超調小,穩定快,過沖低。自適應PID,一鍵自整定。
④超溫,傳感器脫落報警保護,可設置99段程序。
⑤擴展:支持標準RS485等通用接口,可配置MODBUS RTU 通訊協議,一臺主機控制多套設備,EEPROM存儲下載,數據自采集。可接上位機軟件,查看歷史實時數據或者曲線。
①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.
②Can set to operate by constant speed or constant torque mode.
③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.
④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.
⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.
技術參數 Technical Parameter?
測量范圍 Temperature measurement range | 0-100°C/ -90℃-400℃ | ||||||
分 辨 率 Display resolution | 0.1°C | ||||||
輸入方式 Input mode | 熱敏電阻/PT100 Thermistor/PT100 | ||||||
輸出方式 Output mode | 220V/24A可控硅輸出 220V/24A Silicon Controlled rectifier (scr) output | ||||||
負載功率 Load power | 制冷(風機)0-2000W 25A繼電器,加熱0-2000W可控硅, 25A繼電器保護 Refrigeration (fan) 0-2000W 25A relay,Heating 0-2000W thyristor, 25A relay protection | ||||||
速度范圍 Measurement range | 0-1500RPM | ||||||
測量誤差 Inaccuracy of measurement | ±1%FS ±1% Revolution/minute | ||||||
分 辨 率 Display resolution | 1 RPM | ||||||
電機類型 Motor Type | FOC矢量直流無刷電機或伺服電機 FOC vector control brushless DC motor or servo motor | ||||||
電機功率 Motor power | 驅動電流 2.5A/5A/10A Drive current 2.5A/5A/10A | ||||||
供電電源 Supply voltage | 直流24V DC24V | ||||||
程序段 Program segment | 99段編程 10 program segments | ||||||
定時范圍 Timer range | 0-99H59Min | ||||||
工作環境 Working condition | -5℃-50℃,相對濕度35%-85% Environment temperature:-5℃-50℃,Relative humidity:35%-85% | ||||||
外觀尺寸 Exterior size | 92mm*150mm | ||||||
開孔尺寸 Hole size | 86mm*144mm | ||||||
電源板尺寸 Power Panel size | 110mm*170mm (10A) & 100mm*100mm(2.5A &5A) |
CONTACT
辦公地址:上海市浦東新區申港大道133號(百潤時代中心)508室Tel:21-64840700
手機:18964640700